Menstrual pants machine is a modern high-tech product of microelectronic technology, automation technology, computer technology and intelligent technology. As the mechanical equipment has the characteristics of advanced technology, complex structure and high intelligence in the operation process, the maintenance technology, maintenance theory and means are very different from the traditional mechanical maintenance in the maintenance process of mechanical equipment. In the face of this situation, maintenance personnel need to advance the development process of the times, master the advanced maintenance technology principle and fault detection technology, and ensure the stable operation of menstrual pants equipment.

1.Preparation for maintenance of menstrual pants machine

Field maintenance of menstrual pants machine is to diagnose mechanical equipment faults (mainly mechanical parts), find out the faulty parts, replace the corresponding normal spare parts, and restore the normal operation of the machine. The key of this process is diagnosis, that is to detect the system or peripheral circuits, determine whether there is a fault, and point out the exact location of the fault location. From the whole machine to the patch panel, and even to the components in some cases. This is the main part of the whole maintenance work.

2.Field fault diagnosis of menstrual pants machine

First, preliminary diagnosis. When the fault site data of menstrual pants machine is relatively comprehensive, the fault location can be determined through data analysis, or the interface signal method can be used for preliminary diagnosis in combination with the fault phenomenon, and then each part can be checked one by one according to the specific characteristics of the fault to preliminarily diagnose the fault. In the actual fault diagnosis process, sometimes only one method can be used to diagnose the fault, and sometimes multiple detection methods need to be comprehensively used to diagnose the fault. The diagnosis and identification of various fault points mainly depend on the operating characteristics of fault equipment and the depth of structural fault; Second, alarm handling.

3.Troubleshooting of menstrual pants machine

Generally, system alarms caused by transient faults can be eliminated by hardware reset or system power off. If the fault still exists after the initial reset, it is necessary to detect and diagnose the hardware. Change parameters and procedures. System operating parameters are the main criteria for determining system operating capacity. If the parameter setting is wrong, some functions will not start normally. At the same time, sometimes the shutdown fault is caused by program error. Therefore, the quick search function of the system can be used to check the cause of the fault. In the process of troubleshooting and maintenance, adjustment is the simplest and most widely used troubleshooting method. By adjusting the potentiometer to solve the system fault, the best adjustment method is the best match between the servo drive system and the drag mechanical system.

Menstrual pants machine is prone to problems, and the maintenance of mechanical equipment directly affects the overall quality. Therefore, we must strengthen the repair and maintenance of machinery. Improve the attention of management personnel to mechanical maintenance, and effectively improve the maintenance technology level of mechanical equipment. In addition, the supervision of mechanical maintenance should be strengthened to improve work efficiency, so as to better develop mechanical maintenance technology.