Since maxi length overnight sanitary napkin machine is an important tool for the hygiene industry and is of great significance to the development of the hygiene industry, it is important to check and maintain the machine on a regular basis. First of all, the concerned maintenance personnel should have a detailed understanding of the various operating parameters of the maxi length overnight sanitary napkin equipment. Once a malfunction occurs, it must be located in detail for the first time to determine an effective solution.

1.Preparation of maxi length overnight sanitary napkin machine before use

Before using the maxi length overnight sanitary napkin machine, the staff must check whether the switch position of the equipment is correct and whether various equipment is safe to operate, including interlocking devices and grounding devices. In addition, the relevant technical personnel must constantly improve their own operating procedures to ensure that they use the machine in a standardized manner. First of all, in the process of machine transportation, enterprises should send special personnel to transport the equipment. A series of anti-vibration measures must be taken during transportation to ensure that the equipment is not damaged during the transportation process. In the process of equipment transportation, the principle of lightly holding and placing should be followed to avoid collision of the machine in the process of transportation. Secondly, in the process of parts transportation, relevant personnel should ensure that the parts are kept level in the transportation vehicle to reduce the collision with the body.

2.Maintenance of maxi length overnight sanitary napkin machine

When using the maxi length overnight sanitary napkin machine, the relevant operators must regularly maintain the machine to improve its service life and work efficiency. In the process of maintenance, it mainly includes the following aspects. First, before using the machine, the relevant personnel should check whether the switch position of the equipment is correct, whether the connection is tight, and whether the indicator pin of each instrument is flexible. In addition, the devices of each equipment should be checked whether they can be used flexibly. Secondly, when using the machine, the relevant operators must strictly abide by the relevant operation specifications when using the machine.

In the process of use, once a malfunction or abnormal situation is found, the equipment should be immediately shut down and troubleshoot. In addition, the ventilation status of the motor in the machine should be strictly monitored to ensure that the ventilation can be carried out normally and prevent the equipment from stagnation. Finally, after the machine is used, relevant operators should clean up the equipment debris in time and add anti-rust oil to the sliding surface of the equipment, and the operating handle should be set in the empty position. After moving the parts to a reasonable position, cut off the power of the machine.

3.Regular maintenance of maxi length overnight sanitary napkin machine

For maxi length overnight sanitary napkin machine maintenance, machine use time more than 500 hours, the relevant operators to the equipment for a level of maintenance. First-level maintenance mainly includes fastening, lubrication and cleaning equipment. In this process, the relevant maintenance personnel should cut off the machine power, clean the surface of the machine, especially the dead corner of the equipment. In addition, the relevant personnel should check whether the machine parts are intact. For secondary maintenance, on the basis of primary maintenance, equipment parts adjustment and parts inspection are the key contents of secondary maintenance, and secondary inspection can ensure that the mechanical equipment is in good condition.

In short, in order to improve the efficiency and service life of maxi length overnight sanitary napkin machine, the relevant personnel must pay attention to the maintenance of the equipment when using the machine, continuously improve maintenance skills, operate according to specifications, and improve the overall efficiency of the enterprise.